Waterproofing Contractors

What is the General Recommendation for Waterproofing Contractors?

Reliance Group NYC hаs сreаted а wide netwоrk оf serviсes, within whiсh the sрeсiаlists оf the Quаlity Serviсe рrоvide teсhniсаl аssistаnсe tо соntrасtоrs fоr the instаllаtiоn аnd орerаtiоn оf the соmраny’s mаteriаls, exрerts frоm the Соnstruсtiоn Асаdemy trаin соntrасtоrs’ emрlоyees, аnd Reliance Group NYC engineers gо tо sites. Аn аdditiоnаl соnfirmаtiоn оf the high рrоfessiоnаl level оf the соntrасtоr wаs the Reliance Group NYC Сertifiсаte оf Exсellenсe, the mаin соnditiоns fоr оbtаining whiсh аre the trаining оf emрlоyees аt the Соnstruсtiоn Асаdemy аnd the quаlity оf the wоrk рerfоrmed, соnfirmed by the Reliance Group NYC sрeсiаlists.

Why do you Need Waterproofing?

The purpose and subtleties of the moisture protection device What is waterproofing for? The main purpose of Reliance Group NYC is to protect building structures from the harmful effects of water and other liquids. Waterproofing ensures the long-term operation of structures by increasing their durability and reliability. “Waterproofing works” are in demand at all stages of construction – both at the stage of laying the foundation and during the installation of ceilings, erection of walls, and in the production of floor screed. Residents of multi-story buildings know firsthand the importance of competent bathroom waterproofing.

Why waterproofing is so Important ?

Experts say that about seventy per cent of all underground waterproofing is leaking. This suggests that many do not know how and how to properly protect the foundation and all underground rooms (garages, basements) from moisture. Some ordinary people do not understand why waterproofing is needed and do not even look for an answer to this question. Let’s take the average “developer” who “dug” the site to the depth of the alleged foundation did not reveal a single gram of water there. His conclusion: waterproofing is an extra expense, and under the guise of its necessity, unscrupulous builders are trying, as the common people say, to “cut the dough”. 

waterproofing contractors nyc

And it’s good when the waterproofing contractors in NYC insists on high-quality moisture protection and can objectively substantiate his position from the point of view of common sense. If not, then the choice falls on a cheap material, which in most cases cannot stop the flow. Poorly equipped waterproofing can lead to rather sad consequences. Repairing and “fixing” this protective layer will cost an order of magnitude more than its initial competent installation. No matter how deep the groundwater lies, underground premises should be waterproofed in an exclusively secure way.

Waterproofing Classification by Purpose

Various structures and their elements sometimes require a completely different approach to constructing the waterproofing layer. Therefore, depending on the purpose, it is customary to distinguish between the following types of waterproofing.

  • Foundation Waterproofing

 This is perhaps the most responsible protective measure possible. The overall strength and durability of the building depend on how responsibly, efficiently, and thoughtfully this work will be organized. Salts, corrosive acids, and other chemical compounds can significantly spoil (leach out) the cement stone. And this inevitably entails a decrease in the strength of the most significant sections of the structure.

  • Roof Waterproofing.

It is designed to protect the roof and roofing materials from the harmful effects of atmospheric precipitation. Various polymer compositions have successfully proven themselves as roofing waterproofing agents. The most effective and progressive method for flat roofs is poly membrane protection.

  • Basement Waterproofing. 

Serves to prevent dampness, mildew, and mildew from appearing in this room. The optimal materials for these purposes are poly mineral compositions and specially modified mixtures.

  • Flooring/Floor Waterproofing. 

It is carried out using roll materials or penetrating compositions. With special responsibility, one should approach the device for waterproofing the floor in the bathroom – here, the harmful effects of moisture are especially noticeable.

Why do you Need Waterproofing Materials?

Regardless of the covering of your roof, it must be additionally protected from excess moisture. It’s not even about the reliability of the material used, but about the joints that cannot be avoided, adhesion to the walls, the outlet of drain pipes, etc. On the other hand, the problem of moisture accumulation is concentrated even inside the house. All vapours of air, iron, steam from the stove, etc., inevitably rise upward. The solution is a competent vapour barrier, the exception is a cold roof.

waterproofing contractors in nyc

When the external environment and internal evaporation interact, condensate is formed – droplet settling. Waterproofing, the structure of ventilation, is just struggling with this problem. When choosing a material, the consumer ideally looks for a set of features:

  • savings
  • practicality
  • environmentally friendly components
  • minimum toxic effects
  • level of complexity for installation work

At the same time, we must not forget about the advantage of using products from one manufacturer in the issue of waterproofing and vapour barrier.

Waterproofing value

The question of the best way to waterproof the foundation is very relevant because it is the foundation that is the basis of any structure. Therefore, its reliability directly affects the life of the building. The decision on how to waterproof the foundation depends on its type. According to the structures, all foundations are subdivided into the block and monolithic. In the first case, the base of the building is formed from ready-made foundation blocks. A monolithic concrete structure is poured directly at the construction site in the second. Many types of foundations, for example, strip, pile, and slab, can be either monolithic or block. The technologies used for waterproofing block and monolithic foundations are different, but there are means in both cases.

Concrete is a material that easily absorbs moisture, so exposure to surface water and groundwater can negatively affect structures made from it. Suppose the waterproofing of the foundation is insufficient. In that case, mould may appear on the walls and ceiling of the building, basements are heated, and the constant exposure to dampness and moisture destroys the structures. Temperature extremes become especially dangerous since moisture freezing can cause concrete cracking. Information on how to waterproof your home’s foundation will help you avoid these kinds of problems. By paying special attention to the implementation of waterproofing structures in general, you will prevent serious problems in the future.

Last Word

Currently, many manufacturers offer waterproofing materials, but waterproofing contractors in NYC work effectively solves the issue of how to make a foundation waterproofing with your own hands. There are waterproofing materials that are available and do not require special equipment. Thanks to this, it is quite possible to cope with the waterproofing of the building on your own. There are several types of waterproofing materials on the market that are easy to use.

Leave a Reply

Your email address will not be published. Required fields are marked *